Sell
!! NEW !!
since 22.03.2014
Complete Cylinder Production Department.
The whole operation was functional, until we ceased engraving
operations in December.
All plating tanks were emptied and cleaned.
All equipment is available and functional.
More Pictures Here
Basic list&info.
Plating line-all with 12VDC rectifiers
1 pcs. nickel tank-1500A rectifier
3 pcs. copper tanks-3000A rectifiers
2 pcs. degrease tanks, for Cu or Cr-200A rectifiers
1 pcs. dechrome tank-100A rectifier
2 pcs. chrome tanks-one with 4000, the other newer one with 5000A(480V, 3 ph) rectifiers.
2 pcs. prep/setup stations for crane to start cycle and prep. and inspect cylinders.
20 pcs. holding stations for in progress cylinders.
1 pcs. automatic crane assembly with Siemens S5 program for cycle handling of programmed
cylinders.
Manual shafting of cylinders.
Control panel with S5 PLC and computer to enter desired program cycles.
Galvano Line
Plating line-all with 12VDC rectifiers

Item # 1 : 1 pcs. nickel tank-1500A rectifier

Item # 2 : Copper Tank 1 with 3000A rectifier

Item # 3 : Copper Tank 2 with 3000A rectifier

Item # 4 : Copper Tank 3 with 3000A rectifier

Item # 5 : CR Degrease Tank 1 for Cu or Cr with 200A rectifiers

Item # 6 : CU Degrease Tank 1 for Cu or Cr with 200A rectifiers

Item # 7 : Dechrome Tank with 100A rectifier

Item # 8 : Chrome Tank 1 (older) with 4000A(480V, 3 ph) rectifiers.

Item # 9 : Chrome Tank 2 (newer) with 5000A(480V, 3 ph) rectifiers.
2 pcs. prep/setup stations for crane to start cycle and prep. and inspect cylinders.

Item # 10 : 20 pcs. holding stations for in progress cylinders.

Item # 11 : Automatic Crane Assembly with Siemens S5 program for cycle handling of
programmed cylinders.


Item # 12 : Manual shafting of cylinders.

Item # 13 : Control panel with S5 PLC and computer to enter desired program cycles.
Polishing & Sizing


Item # 14 + 15 : 2 double head stone polishers

Item # 16 : 1 Superperfast-lathe&polisher combo.
All above is Acigraf equipment with 480to380V stepdown transformer.

Item # 17 : 1 Lathe
Engravers

Item # 18 : 1 pcs. B710 Ohio
Item # 19 : 1 pcs. B722 Ohio

Item # 20 : 1 pcs. KWalter
.jpg)
Water treatment-semiauto
Item # 21 : 2 pcs. 8000gl tanks
Item # 22 : 2 pcs. 2500gl tanks
Item # 23 : 4 pcs. 2000gl tanks
Item # 25 : 4 pcs. 500gl tanks

Item # 26 : 1 filter press
Item # 27 : 1 each of ORP and PH meters
Item # 28 : Mixers, pumps etc..
Item # 29 : Associated/misc. equipment: carts,
Item # 30 : Cu hardness tester,
Item # 31 : cell sizing inspection microscopes,
Item # 32 : lab equipment,
Item # 33 : 380V transformer with breaker panel,
Item # 34 : spare parts galore etc..
|